not set clock in domain controler that in internet
Hello,
Please see Meinolf's blog about time sync: http://msmvps.com/blogs/mweber/archive/2010/06/27/time-configuration-in-a-windows-domain.aspx
If your DC is a VM, see that: http://blogs.msdn.com/b/robertvi/archive/2011/05/11/time-synchronization-and-domain-controller-vm-s.aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft
Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
April 9th, 2012 7:15pm
Take a look at this KB (How to configure an authoritative time server in Windows Server) :
http://support.microsoft.com/kb/816042
BR
Ren
Free Windows Admin Tool Kit Click here and download it now
April 9th, 2012 7:57pm
Hello,
please start with my blog about domain time configuration
http://msmvps.com/blogs/mweber/archive/2010/06/27/time-configuration-in-a-windows-domain.aspx. Then please ask again with error messages in detail from the event viewer.Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
April 9th, 2012 8:32pm
i have a server2003 .it is a domain controler. it is in internet.but when i set clock it, but it
after a few hours ,again clock back about 10min
please help me
Free Windows Admin Tool Kit Click here and download it now
April 10th, 2012 9:11am
in some help say
Click Start, click Run, type timedate.cpl, and then click
OK.Click the Internet Time tab, and then click to select the
Automatically synchronize with an Internet time server check box. Click
OK.but how you see in picture, no have tab internet time
April 10th, 2012 9:22am
IS this server on VM?
Regards,
_Prashant_MCSA|MCITP SA|Microsoft Exchange 2003 Blog - http://prashant1987.wordpress.com Disclaimer: This posting is provided AS-IS with no warranties/guarantees and confers no rights.
April 10th, 2012 9:43am
Hello,
Please see Meinolf's blog about time sync: http://msmvps.com/blogs/mweber/archive/2010/06/27/time-configuration-in-a-windows-domain.aspx
If your DC is a VM, see that: http://blogs.msdn.com/b/robertvi/archive/2011/05/11/time-synchronization-and-domain-controller-vm-s.aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft
Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Free Windows Admin Tool Kit Click here and download it now
April 10th, 2012 12:18pm
Take a look at this KB (How to configure an authoritative time server in Windows Server) :
http://support.microsoft.com/kb/816042
BR
Ren
April 10th, 2012 12:59pm
Hello,
please start with my blog about domain time configuration
http://msmvps.com/blogs/mweber/archive/2010/06/27/time-configuration-in-a-windows-domain.aspx. Then please ask again with error messages in detail from the event viewer.Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Free Windows Admin Tool Kit Click here and download it now
April 10th, 2012 1:34pm
i config it same a you say. but after 3 week ,again 10 min late
May 21st, 2012 10:58pm
Hello,
as we asked beofre please post the complete event viewer errors for w32time source.
Do you use any kind of GPO for time confiugration settings?
Did you reset the time to default and configured it again? Please run the following in an elevated command prompt:
net stop w32time
w32tm /unregister
w32tm /register
net start w32time
After that is done:
w32tm /config /manualpeerlist:PEERS /syncfromflags:manual /reliable:yes /update
Please set for PEERS the time source as listed above, either with its ip address or DNS name. If more then one is needed separate them with a space in between and don't forget the quotes: "time.domain.com time1.domain.com"
Internet Time servers you can find here:
http://www.pool.ntp.org/
And choose ANOTHER time source as the one you are using now.Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Free Windows Admin Tool Kit Click here and download it now
May 22nd, 2012 4:20am
this computer is my domain controler
i run this command
net stop w32time
w32tm /unregister
w32tm /register
net start w32time
but i dont underestand how i used of site (http://www.pool.ntp.org/)
same i go to this site , then asia,then click korea,
how do???
Korea kr.pool.ntp.org
We can use more servers in this country. If you have a server with a static IP, please consider
joining the pool!
To use this pool zone, add the following to your ntp.conf file:
server 0.kr.pool.ntp.org
server 1.asia.pool.ntp.org
server 0.asia.pool.ntp.org
IPv4
There are 12 active servers in this zone.
11 (+1) active 1 day ago
12 active 7 days ago
13 (-1) active 14 days ago
11 (+1) active 60 days ago
13 (-1) active 180 days ago
16 (-4) active 1 year ago
8 (+4) active 3 years ago
7 (+5) active 6 years ago
IPv6
There are 0 active servers in this zone.
0 active 1 day ago
0 active 7 days ago
0 active 14 days ago
0 active 60 days ago
0 active 180 days ago
0 active 1 year ago
June 13th, 2012 11:35pm